Analisis Objective Matrix (OMAX) Untuk Menentukan Produktivitas Produksi

Authors

  • Yulia Indriani Program S1 Teknik Industri Fakultas Teknik Universitas Pahlawan Tuanku Tambusai
  • Resy Kumala Sari Program Studi Teknik Industri, Fakultas Teknik, Universitas Pahlawan Tuanku Tambusai
  • Safni Marwa Program Studi Teknik Informatika, Fakultas Teknik, Universitas Pahlawan Tuanku Tambusai

DOI:

https://doi.org/10.31004/jestm.v4i1.150

Keywords:

PT.Mitra Bumi, Produktivitas, Objective Matrix (OMAX)

Abstract

PT. Mitra Bumi is a company operating in the palm oil sector that produces CPO and so far wants to know the level of productivity. OMAX is a partial productivity measurement system developed to monitor productivity in each part of the company with productivity criteria that are appropriate to the existence of that part (objective). Productivity is an important factor to support the survival of a company by analyzing and evaluating the output obtained based on its level of performance during a certain period. To find out the current level of productivity in the production department, it is necessary to measure productivity, because the results of this productivity measurement can be used as a consideration for implementing efforts that can be made to increase the company's productivity. Productivity measurements at PT Mitra Bumi are carried out using the method, objective matrix analysis (OMAX). The criteria used in this research are raw material productivity, effective working hours productivity, machine working hours and production effectiveness. The highest productivity index value was in July with a total value of 112.00%, while the lowest value was in June with a value of -91.33%. The cause and effect diagram is used to determine the causes of the decline in productivity in the CPO production section. As a result, production productivity at PT Mitra Bumi was influenced by factors that caused productivity to decrease, namely damage to the tippler machine, unsuitable raw materials, and less skilled operators

References

Limanseto, H. (2021). Industri Kelapa Sawit Indonesia: Menjaga Keseimbangan Aspek Sosial, Ekonomi, dan Lingkungan.Ekon.Go.Id.https://www.ekon.go.id/publikasi/detail/2921/industri-kelapa-sawit-indonesia-menjaga-keseimbangan-aspek-sosial-ekonomi-dan-lingkungan#

Mahmudi, A. Avi. (2021). Balanced Scorecard-AHP-OMAX(Implementasi Penilaian Kinerja Perguruan Tinggi). Pascal Books.

Ningrum, M. P. S., & Almahdy, I. (2018). Pengukuran Produktivitas Dengan Metode Objective Matrix (OMAX) Pada Line MPR II di Industri Pelapisan Logam. Jurnal PASTI Volume, XII(2), 262–272.

Ramadhani, D. S. (2018). Analisis Kualitas Pada Home Industry Tahu Bulat di Kepanjen Malang. Jurnal Valtech, 1(2), 131–136.

Rusliadi. (2019). Analisis Produktivitas Bagian Produksi Menggunakan Metode Objective Matrix ( OMAX ) Di PT Bintara Tani Nusantara.

Setiowati, R. (2018). Analisis Pengukuran Produktivitas Departemen Produksi dengan Metode Objective Matrix (OMAX) pada CV. Jaya Mandiri. Faktor Exacta, 10 (Desember 2012), 199–209.

Silalahi, L. A., Rispianda, & Yuniar. (2018). Usulan Strategi Peningkatan Produktivitas Berdasarkan Hasil Analisis Pengukuran Objective Matrix (OMAX) pada Departemen Produksi Transformer (Studi Kasus di PT. XYZ). Jurnal Online Institut Teknologi Nasional Jurusan Tehnik Industri No.03, 02 (Peningkatan Produktivitas), 84–95.

Slameto, & Susiyanto. (2018). Penggunaan Analisis Diagram Tulang Ikan Untuk Pengembangan Mutu Sekolah. Laporan Akhir, 114.

Downloads

Published

2024-03-14

How to Cite

Indriani, Y., Sari, R. K., & Marwa, S. (2024). Analisis Objective Matrix (OMAX) Untuk Menentukan Produktivitas Produksi. Journal of Engineering Science and Technology Management (JES-TM), 4(1), 27–32. https://doi.org/10.31004/jestm.v4i1.150

Issue

Section

Articles

Most read articles by the same author(s)