Static Stress Simulation Analysis of Skid Frame of Portable Open Waste Container Using FEA Method on SolidWorks

Authors

  • Nurul Ulfah Departement of Mechanical Engineering, Politeknik Negeri Batam, Batam,Indonesia
  • Yosef Adicita Departement of Mechanical Engineering, Politeknik Negeri Batam, Batam,Indonesia
  • Nugroho Pratomo Ariyanto Departement of Mechanical Engineering, Politeknik Negeri Batam, Batam,Indonesia
  • Roza Puspita Departement of Mechanical Engineering, Politeknik Negeri Batam, Batam,Indonesia
  • Nurul Laili Arifin Departement of Mechanical Engineering, Politeknik Negeri Batam, Batam,Indonesia
  • Ari Wibowo Departement of Mechanical Engineering, Politeknik Negeri Batam, Batam,Indonesia
  • Rama Dani Eka Putra Departement of Mechanical Engineering, Universitas Bengkulu , Bengkulu,Indonesia

Keywords:

Portable open waste container, Skid frame, Finite Element Analysis (FEA), Stress and deformation simulation, Factor of safety (FOS) using SolidWorks

Abstract

Portable open waste container is a traditional waste transport tool that is still widely used in various places. Skid frame is an important component in the construction of portable open waste container that serves to withstand static and dynamic loads during waste transport. Therefore, it is necessary to analyse the strength of the skid frame structure to ensure the design is able to withstand the given load. This research aims to analyse the stress distribution, deformation, and safety factor of the portable open waste container skid frame using the Finite Element Analysis method in Solidworks software. The analysis results show that the maximum stress that occurs in the skid frame is 249.921 MPa which almost reaches the yield stress of ASTM A36 steel material, which is 250 MPa, with a maximum deformation of 20.544 mm, and a minimum safety factor of 0.6. Based on these results, it can be concluded that the skid frame design needs to be optimised to improve the durability of the structure and safety during operation

References

Abbas, H., Juma, D., Ma’ruf, M., & Jahuddin, R. (2020). ILTEK : Jurnal Teknologi Penerapan Metode Elemen Hingga Untuk Desain Dan Analisis Pembebanan Rangka Chassis Mobil Model Tubular Space Frame. ILTEK: Jurnal Teknologi, 15(No. 2).

Adicita, Y., & Afifah, A. S. (2022). Analisis Sistem Pemilihan dan Daur Ulang Sampah Rumah Tangga di Daerah Perkotaan Menggunakan Pendekatan Life Cycle Assessment (LCA). Jurnal Ilmu Lingkungan, 20(2), 406–413. https://doi.org/10.14710/jil.20.2.406-413

Buranapunviwat, K., & Sojiphan, K. (2021). Destructive testing and hardness measurement of resistance stud welded joints of ASTM A36 steel. Materials Today: Proceedings, 47, 3565–3569. https://doi.org/10.1016/j.matpr.2021.03.562

Evtushenko S.I., Petrov I.A., Alekseev S.A., & Alekseeva A.S. (2017, May). 2017 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM) : proceedings : South Ural State University (national research university), Chelyabinsk, Russia, May 16-19, 2017.

Farida, I., Prasetyo, K., Furqon, M. M., & Dika, P. (2024). Analisis Kekuatan Desain Skid Frame Dengan Simulasi Linear Statik Berbasis Inventor-Nastran. Jurnal Patriot Biru TNI AU, 3(3).

Fitrianisa, D., Luqyana, D., & Milah Muhamad, A. (2023). Numerical simulation analysis of structural strength of portable skid for storage tank with 50.000 liters capacity. Disseminating Information on the Research of Mechanical Engineering-Jurnal Polimesin, 21(2). http://e-jurnal.pnl.ac.id/polimesin

Khalid, N., Hussin, N. H. F., Saat, A. M., Khalid, P. Z. M., & Rahamaddulla, S. R. (2024). Design and Strength Analysis of Boat Trailer Sliders Using the Finite Element Method. In Advanced Structured Materials (Vol. 208, pp. 321–334). Springer. https://doi.org/10.1007/978-3-031-56844-2_28

Khan, K., Chen, Z., Liu, J., & Tsavdaridis, K. D. (2023). Compressive behaviors of corner-supported modular steel sway frames with rotary inter-modular connections. Thin-Walled Structures, 193. https://doi.org/10.1016/j.tws.2023.111245

Morido-García, G., & De Santos-Berbel, C. (2024). Structural Performance of Bolted Lateral Connections in Steel Beams under Bending Using the Component-Based Finite Element Method. Applied Sciences (Switzerland), 14(9). https://doi.org/10.3390/app14093900

Nath, A., Barai, S. V., & Ray, K. K. (2021). Studies on the experimental and simulated cyclic-plastic response of structural mild steels. Journal of Constructional Steel Research, 182. https://doi.org/10.1016/j.jcsr.2021.106652

Nawar, M. T., El-Zohairy, A., Eisa, A. S., Mohammed, A., & Gomaa, S. (2025). FE Parametric Study of Composite Cold-Formed Steel Beams Under Positive and Negative Loadings. Journal of Composites Science, 9(5). https://doi.org/10.3390/jcs9050209

Perkasa, M., BesarTeknologi Kekuatan Struktur BRIN, B., & Selatan, T. (2021). Analisis Kekuatan Struktur Beam Skid Base Dengan Metode Elemen Hingga (FEM ). Jurnal Teknik Mesin: CAKRAM, 4(2).

Putri Adnyani, L., Aisyah, N., Gusriana Harahap, R., Dianiswara, A., Studi Teknik Kelautan, P., & Teknologi Kalimantan, I. (2019). Analisa Kekuatan Deck BARGE NANIA 10070 DWT Dengan Dua Metode Pembebanan. In KAPAL (Vol. 16, Issue 2). http://ejournal.undip.ac.id/index.php/kapal

Restu Pahlawan, A., Hanifi, R., & Santosa, A. (2021). Analisis Perancangan Frame Gokart dari Pengaruh Pembebanan dengan Menggunakan CAD Solidworks 2016. Jurnal METTEK, 7(1), 1. https://doi.org/10.24843/mettek.2021.v07.i01.p01

Rizki Amelia, G., & Prasetyo, N. A. (2019). UJI KEKUATAN SKID-FRAME PADA HORIZONTAL PRESSURE VESSEL BERBASIS SIMULASI NUMERIK. Jurnal Teknologi Dan Riset Terapan (JATRA), 1(1). http://jurnal.polibatam.ac.id/index.php/JATRA,https://jurnal.polibatam.ac.id/index.php/JATRA

Sajid, H. U., & Kiran, R. (2018). Influence of high stress triaxiality on mechanical strength of ASTM A36, ASTM A572 and ASTM A992 steels. Construction and Building Materials, 176, 129–134. https://doi.org/10.1016/j.conbuildmat.2018.05.018

Spesifikasi Teknis Pengadaan Arm Roll Kontainer. (2012). SJA 001-ARM ROLL + KONTAINER TERTUTUP. www.karoserisenangjaya.com,

Thangavel, P., Palanisamy, M., Kumar, D. R., Wipulanusat, W., Sunkpho, J., & Roy, K. (2025). Investigation of cold formed steel angle compression through high throughput design FEA and machine learning. Scientific Reports, 15(1). https://doi.org/10.1038/s41598-025-03991-9

Tu, Y., Liu, Z., Tu, Y., & Sheng, M. (2025). Computational modeling of residual stress in welded high-strength steel box sections. PLOS ONE, 20(9 September). https://doi.org/10.1371/journal.pone.0332445

Tumewu, D., Saerang, E. J., & Harahap, J. T. (2019). Studi Perbandingan Metode Perhitungan Struktur Statis Tak Tentu pada Portal Bangunan Gedung. Jurnal Teknik Sipil Terapan, 1(2). http://Jurnal.polimdo.ac.id/

Widiastuti, H., Arifin, N. L., & Mutiarani. (2019). Waste sorting campaign toward green campus: Case study in Politeknik Negeri Batam. AIP Conference Proceedings, 2085. https://doi.org/10.1063/1.5094985

Yang, K., Khan, K., Yang, Y., Jiang, L., & Chen, Z. (2025). Impact of Inter-Modular Connections on Progressive Compressive Behavior of Prefabricated Column-Supported Volumetric Modular Steel Frames. Crystals, 15(5). https://doi.org/10.3390/cryst15050413

Yingjun Guan, Yang Zhao, Deqiang Mu, & Yingzhi Guan. (2010, October). 2010 International Conference on E-Product E-Service and E-Entertainment.

Downloads

Published

2025-09-30

How to Cite

Ulfah, N., Adicita, Y., Ariyanto, N. P., Puspita, R., Arifin, N. L., Wibowo, A., & Putra, R. D. E. (2025). Static Stress Simulation Analysis of Skid Frame of Portable Open Waste Container Using FEA Method on SolidWorks. Journal of Engineering Science and Technology Management (JES-TM), 5(2), 350–358. Retrieved from https://jes-tm.org/index.php/jestm/article/view/315

Issue

Vol. 5 No. 2 (2025): September 2025

Section

Articles

License

Copyright (c) 2025 Nurul Ulfah, Yosef Adicita, Nugroho Pratomo Ariyanto, Roza Puspita, Nurul Laili Arifin, Ari Wibowo, Rama Dani Eka Putra

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.