Occupational Health and Safety Risk Analysis Using The HAZOP Method at UD Kerupuk Mamak Kito
DOI:
https://doi.org/10.31004/jestm.v5i2.331Keywords:
Work Environment, Hazards, HAZOP, Work Risk, Occupational Health and Safety, EnvironmentAbstract
Occupational Health and Safety (OHS) is an approach designed to prevent workplace accidents that may cause death, injury, or disability. If potential hazards in the workplace are not adequately identified and managed, they can lead to fatigue, musculoskeletal disorders, injuries, or serious accidents. Due to the high-risk nature of its production processes and the lack of ergonomic considerations, the kerupuk processing industry at UD Mamak Kito must pay greater attention to Health, Safety, and Environment (HSE). One method to support OHS implementation is the HAZOP (Hazard and Operability Study) method, which systematically identifies potential hazards in the workplace. The study identified ten high-risk conditions, primarily associated with the use of personal protective equipment (PPE), ergonomics, and exposure to high heat or hot oil. Six moderate-risk conditions were also found, including failure to use PPE and minor environmental hazards. Low-risk factors, including minor cuts and slippery surfaces, were additionally observed. Based on these findings, recommended improvements include enhancing workplace conditions and promoting safer work practices to reduce the risk of accidents and occupational health problems.
References
Debi, S. (2022). Pendampingan model promosi digital UMKM kerupuk jangek Pal Ali pada masa new normal di Kota Pekanbaru. Jurnal Pengabdian Masyarakat Multidisiplin, 5(3), 119–128.
Hamali, A. Y. S. S. (2016). Pemahaman manajemen sumber daya manusia (pp. 162–181). CAPS (Center For Academic Publishing Service).
Isefansyah, P. D., & Sisca, V. (2024). Analisis usaha dan bauran pemasaran kerupuk kulit Kabita di Kelurahan Tuah Karya Kecamatan Tampan Kota Pekanbaru. Jurnal Dinamika Pertanian, 40(1), 63–74.
Kumar, S., & Dixit, P. (2018). Application of hazard and operability (HAZOP) study for risk assessment in food processing industries. International Journal of Scientific Research in Science and Technology, 4(8), 428–434.
Mindhahayani, I. (2020). Analisis risiko keselamatan dan kesehatan kerja dengan metode HAZOP. Jurnal SIMETRIS, 11(1), 53–60.
Muttaqin, I. (2021). Pengaruh program pelatihan keselamatan kerja dan kesehatan kerja (K3) terhadap kinerja karyawan pada PT. Perkebunan Nusantara V PKS Sei Tapung Kabupaten Rokan Hulu (Skripsi, Universitas Islam Negeri Sultan Syarif Kasim Riau).
Ningsih, S. O. D., & Hati, S. W. (2019). Analisis risiko keselamatan dan kesehatan kerja (K3) dengan menggunakan metode hazard and operability study (HAZOP) pada bagian hydrotest manual di PT. Cladtek Bi Metal Manufacturing. Journal of Business Administration, 3(1), 29–39.
Nurmianto, E. (2005). Ergonomi: Konsep dasar dan aplikasinya. Guna Widya.
Parvin, F., Ahmed, S., & Khan, S. (2021). Ergonomic risk evaluation among workers in small-scale food industries: A cross-sectional study. International Journal of Occupational Safety and Ergonomics, 27(4), 1246–1255.
Putri, R.A., & Santoso, B. (2021). Kepatuhan Penggunaan alat pelinfung diri pada pekerja UMKM. Jurnal Kesehatan Kerja Indonesia, 6(2), 85-92.
Rahmanto, I., & Hamdy, M. I. (2022). Analisis risiko kecelakaan kerja karang menggunakan metode hazard and operability (HAZOP) di PT PJB Service PLTU Tembilahan. Jurnal Teknologi dan Manajemen Industri Terapan, 1(2), 53–60.
Restuputri, D. P., & Dyan, R. P. (2015). Analisis kecelakaan kerja dengan menggunakan metode hazard and operability study (HAZOP). Jurnal Ilmiah Teknik Industri, 14(1), 24–35.
Saha, M., & Mazumder, T. (2017). Risk identification and mitigation strategies in small enterprise workplace environments. International Journal of Industrial Ergonomics, 62, 101–110.
Saputra, D., & Kurniawan, R. (2020). Evaluasi penerapan alat pelindung diri (APD) pada industri pengolahan pangan skala kecil. Jurnal Kesehatan Kerja dan Lingkungan, 5(3), 112–120.
Simanjuntak, R. A. (2022). Memahami ergonomi. Akprind Press.
Sutrisno, A., Wijayanti R, R., & Lestari, D. (2019). Risiko Paparan Panas Pada Industri Pangan Tradisional. Jurnal K3, 14(2), 101-109.;
Tarwaka. (2015). Keselamatan kesehatan kerja dan ergonomi (K3E) dalam perspektif bisnis. Harapan Press.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Mela Ardeline, Revi Lasmita
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
