Analysis of Added Value Brownies Product Using the Hayami Method (Case Study: Syiaghi MSME in Pekanbaru City)

Authors

  • Arum Rovarti Ningsih Universitas Riau
  • Angga Pramana Universitas Gadjah Mada
  • Nadya Novianti Dwi Putri Universitas Riau
  • Fikratul Ihsan Universitas Riau
  • Fadlila Endyra Universitas Riau
  • Masyitah Masyitah Universitas Riau

DOI:

https://doi.org/10.31004/jestm.v6i1.433

Keywords:

value added, brownies, hayami method

Abstract

Syiaghi MSMEs have turned their brownie business into a value-added and competitive venture. A study to analyze the added value and competitiveness of brownies produced by Syiaghi MSMEs in PekanbaruThis study applies a quantitative approach using both primary and secondary data. Primary data was collected through direct observation (survey) at Syiaghi MSMEs and interviews with business owners. Secondary data was collected through library studies and other documents. Respondents in this study were determined using the purposive sampling method. Respondents were selected based on the type of brownies marketed (baked brownies), high daily production volume, and marketing to several campuses and stores. The selected respondents were business actors from Syiaghi MSMEs in Pekanbaru City. The analysis of the added value of brownies used the Hayami method. Based on the results of the research conducted on Syiaghi MSMEs with brownie products, it can be concluded that processing flour into brownies provides positive added value. The added value obtained was IDR 398,792 with an added value ratio of 71%, which is relatively high. This indicates that the processing is able to significantly increase the economic value of the product compared to the raw materials. Syiaghi SME is able to manage the production process efficiently through a combination of raw materials, labor, technology, and appropriate packaging. The high added value contributes positively to business profits, production efficiency, and the competitiveness of brownies in the market, making this business viable and promising for further development.

References

Alfarisi S, Fasa, M. I., & Suharto. (2022). Peran UMKM dalam Meningkatkan Kesejahteraan. Jurnal Dinamika Ekonomi Syariah, 9(1), 73–84. https://doi.org/10.53429/jdes.v9i1.307

Aponno, C., Siahaya, S. L., Akuntansi, J., & Ambon, P. N. (2023). Analisis Nilai Tambah Produk Keripik Salak Menggunakan Metode hayami. 2(3), 206–212. https://doi.org/10.54259/akua.v2i3.1860

Babayev, F., & Balajayeva, T. (2023). Ways of Increasing the Competitiveness of Food Industry Enterprises. International Journal of Innovative Technologies in Economy. https://doi.org/10.31435/rsglobal_ijite/30122023/8069.

Cucagna, M., & Goldsmith, P. (2018). Value Adding in the Agri-Food Value Chain. The International Food and Agribusiness Management Review, 21, 293-316. https://doi.org/10.22434/ifamr2017.0051.

Guswandi, A., & Putri, D. A. (2026). Analisis Biaya dan Pendapatan Budidaya Jamur Tiram Putih di UMKM Jamur Betuah Kota Pekanbaru. IKRA-ITH Teknologi Jurnal Sains dan Teknologi, 10(1), 51-59. https://doi.org/10.37817/ikraith-teknologi.v10i1.5392

Li, Y., You, X., Fu, J., & Zhou, W. (2025). Mechanisms and effects of the digital economy on agricultural modernization: A sustainable development perspective.. Journal of environmental management, 392, 126790 . https://doi.org/10.1016/j.jenvman.2025.126790.

Mahardana, I. P. A., Ambarawati, I. G. A. A., & Ustriyana, I. N. G. (2015). Analisis Nilai Tambah Usaha Olahan Ikan (Kasus pada Kelompok Pengolah dan Pemasar Dwi Tunggal di Banjar Penganggahan, Desa Tengkudak, Kecamatan Penebel, Kabupaten Tabanan). E-Journal Agribisnis Dan Agrowisata, 4(2), 56–64.

Melapa, A., Djarkasi, G., Kandou, J., & Ludong, M. (2016). Daya Terima Panelis terhadap Brownies Panggang Berbahan Baku Tepung Umbi Daluga (Cyrtospermamerkussi (Hassk)(Schott). Educacao e Sociedade, 1(1), 1689–1699. https://doi.org/10.35791/cocos.v6i1.6595

Miranda, V., Yusalina, Y., & Asmarantaka, R. W. (2023). Efisiensi Pemasaran Kopi Robusta Di Kabupaten Bogor. Forum Agribisnis, 13(1), 95–109. https://doi.org/10.29244/fagb.13.1.95-109

Muflikh, Y., Muflikh, Y., Smith, C., & Aziz, A. (2021). A systematic review of the contribution of system dynamics to value chain analysis in agricultural development. Agricultural Systems. https://doi.org/10.1016/j.agsy.2020.103044.

Nahar, A., Mila, F., Culas, R., & Amin, M. (2022). Assessing the Factors and Constraints for Value Chain Development of Dairy Food Products in Bangladesh. Heliyon, 8. https://doi.org/10.1016/j.heliyon.2022.e10787.

Naziha, N N., Afiah N, & Samsinar. (2025). Analisis Perhitungan Harga Pokok Penjualan Tahu Pada Pabrik Tahu Pallangga Kabupaten Gowa. BJRM (Bongaya Journal of Research in Management), 9(1), 16–24. https://doi.org/10.37888/bjrm.v9i1.733

Ningsih, A. R., Santosa, & Azrifirwan. (2024). Supply Chain Priority Strategy and Added Value of Jackfruit in Tambang Sub-District, Kampar District, Riau Province . AJARCDE (Asian Journal of Applied Research for Community Development and Empowerment), 8(1), 27–37. https://doi.org/10.29165/ajarcde.v8i1.368

Peña, A., Rovira-Val, R., & Mendoza, J. (2022). Life cycle cost analysis of tomato production in innovative urban agriculture systems. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2022.133037.

Ramadhan, H. (2023). Determinants of Economic Value Addition of Industrial Tuna Fish Processors in the Sea Food Processing Sub-Chain in Malaysia. Journal of Economics Business Industry. https://doi.org/10.59976/jebin.v1i1.11.

Rizaldi, L., Madani, H., Ariskanopitasari, A., & Mikhratunnisa, M. (2023). Determination of the added value of kades coffee agroindustry product using the hayami method (case study of MSME’s Agal Deta, Sumbawa Besar District). Jurnal Agrotek Ummat. https://doi.org/10.31764/jau.v10i2.14140.

Robiani, B., Mukhlis, M., Hamira, H., & Apriani, D. (2024). Impact of Cost Structure on Indonesia Food Industry Value Added. Sriwijaya International Journal Of Dynamic Economics And Business. https://doi.org/10.29259/sijdeb.v8i2.147-158.

Santos, F., Barcellos-Silva, I., Leite-Barbosa, O., Ribeiro, R., Cunha-Silva, Y., & Veiga-Junior, V. (2024). High Added-Value by-Products from Biomass: A Case Study Unveiling Opportunities for Strengthening the Agroindustry Value Chain. Biomass. https://doi.org/10.3390/biomass4020011.

Sharangi, A. (2021). Value-added processing.. CABI Compendium. https://doi.org/10.1079/hc.56141356.20219903171.

Sukaini, S., & Mahyudin, M. (2025). Analisis Strategi Pemasaran terhadap Hasil Penjualan pada Umkm Jaya Lestari Kabupaten Gowa. RIGGS: Journal of Artificial Intelligence and Digital Business, 4(4), 2044–2049. https://doi.org/10.31004/riggs.v4i4.3628

Suprianto., Karismawan, P., & Agustiani, E. (2021). Cost and Margin Analysis of Processed Agroindustry Product Marketing In Mataram City. Humanities and Social Sciences. https://doi.org/10.11648/j.hss.20210905.14.

Sutrisno, S. (2025). Analisis Kelayakan Bisnis Usaha Mikro Kecil dan Menengah (UMKM) Abon Ikan Salem Ditinjau dari Aspek Finansial. RIGGS: Journal of Artificial Intelligence and Digital Business, 4(4), 2494–2501. https://doi.org/10.31004/riggs.v4i4.3825

Syaputra, E., Lubis, S. N., & Iskandarini. (2014). Analisis Nilai Tambah Produk Olahan Bolu dan Brownies Rambutan. USU, 1–12. Retrieved from https://media.neliti.com/media/publications/94703-ID-analisis-nilai-tambah-produk-olahan-bolu.pdf

Valdés, R. (2024). Sustainable Food Value Chains: Approaches to Transaction Costs in Agro-Alimentary Systems of Developing Countries—A Chile Case Study. Sustainability. https://doi.org/10.3390/su16103952.

Yüce, S. G. (2022). Commitment to Learning Programs and Overcoming the Dilemma of Learning Program Adjustment: A Model of Learning Program Use by a Teacher. DergiPark (Istanbul University). https://dergipark.org.tr/tr/pub/mkuefder/issue/70958/1037063

Downloads

Published

2026-03-27

How to Cite

Arum Rovarti Ningsih, Pramana, A., Putri, N. N. D., Ihsan, F., Endyra, F., & Masyitah, M. (2026). Analysis of Added Value Brownies Product Using the Hayami Method (Case Study: Syiaghi MSME in Pekanbaru City). Journal of Engineering Science and Technology Management (JES-TM), 6(1), 271–280. https://doi.org/10.31004/jestm.v6i1.433

Issue

Section

Articles